Licensed & Insured, in Greensboro and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Greensboro
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (336) 542-5382 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Greensboro and surrounding areas · On-site visits included · Free estimate within 24h
Greensboro Metal Roofing is a team of local certified professionals based in Greensboro. We respond quickly in Greensboro and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (336) 542-5382⭐⭐⭐⭐⭐ 4.9/5 · 209 verified Google reviews
“Had our old barn's exterior redone with a metal roof over the existing shingles and it looks like a brand new building. The crew knocked it out in about two days and hauled off every scrap of the old material. Honestly didn't expect it to go that smooth.”
Metal Roof Over Shingles (Retrofit)
“We wanted a real copper roof over the front porch and these guys delivered. The seams are tight, the patina is already starting to come through, and they treated the whole thing like a piece of art. Worth every penny.”
Copper & Specialty Metal Roofing
“They put up the metal roofing on our new pole barn out in the country and I couldn't be happier with how solid it feels. Straight lines, no leaks, and they worked around our schedule with the livestock. Good honest crew.”
Commercial & Agricultural Metal Roofing
“Called them out for an inspection after a bad storm and they climbed up, checked everything, and gave me a straight answer instead of trying to sell me a whole new roof. Small flashing fix and I was good to go. Appreciate the honesty.”
Metal Roof Inspection
“Had a leak around the vent pipe on our metal roof and they tracked it down fast. Sealed it up properly and it's been bone dry through two heavy rains since. Only gripe is they were a bit late on the first visit, but the work itself was solid.”
Flashing, Chimney & Skylight Repair
“Went with standing seam on our brick ranch and it completely changed the look of the house. Clean hidden fasteners, perfect color match to what we picked, and the crew cleaned up so well you couldn't tell anyone had been there. Neighbors keep asking who did it.”
Standing Seam Metal Roofing
“Full tear-off and replacement on our brick home after the old roof started failing. Three-man crew, done in three days, and they walked me through every step. The new panels look fantastic and the house is noticeably quieter in the rain.”
Metal Roof Replacement
“Some panels on our brick house's metal roof had worked loose and were rattling every time the wind blew. They came out, re-fastened everything and replaced a handful of screws. Quick, fair price, and the rattling's gone. Would use them again.”
Metal Roof RepairReal photos of our work in Greensboro · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel system | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, ribbed panels, and standard flashing on a simple roof. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and long panel runs; price rises with pitch, valleys, and panel length. |
| Metal shingle or stone-coated steel | Starting at $14/sq ft | Stamped or granulated profiles; cost moves with HOA color rules and roof complexity. |
| Complex or large-scale job | On estimate | Steep gables, dormers, deck repair, and historic review need an on-site look before a number. |
| Travel | Included | In Greensboro and surrounding Piedmont Triad areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (336) 542-5382, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, simple gable | Starting at $10/sq ft | Includes 24-gauge panels, concealed clips, underlayment and standard trim on a basic roof plane. |
| Mechanically seamed standing seam | Starting at $14/sq ft | Double-locked ribs for high wind uplift, plus heavier trim and custom flashing at penetrations. |
| Historic or complex roof (multiple valleys, steep pitch) | Starting at $18/sq ft | Custom panel lengths, detailed trim and staging for steep gables and historic district requirements. |
| Retrofit over existing shingles | On estimate | Requires deck inspection and code check on existing layers before a number is given. |
| Travel | Included | in Greensboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal roof replacement, standard pitch | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment, and new metal panels on an accessible roof |
| Steep or cut-up roof | Starting at $12/sq ft | Adds labor for steep gables, multiple valleys, dormers, and slow safe access |
| Decking repair and replacement | Quoted per sheet | Priced by the sheet once we strip the old roof and see the actual condition |
| Historic or HOA design review | On estimate | Needs an on-site look because panel profile and color rules vary by district |
| Travel | Included | In Greensboro and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam retrofit | Starting at $7/sq ft | Includes separation layer, panels, fasteners, and standard flashing over sound existing shingles. |
| Exposed-fastener panel retrofit | Starting at $6/sq ft | Corrugated or ribbed panels screwed through old shingles; budget option for barns and simple gables. |
| Metal shingle or stone-coated steel retrofit | Starting at $9/sq ft | Includes stamped or granule-coated product, separation layer, and trim; profile and color drive the price. |
| Deck repair or redecking | On estimate | Priced after attic and roof inspection; soft decking or rot requires tear-off before any retrofit. |
| Travel | Included | In Greensboro and surrounding Piedmont Triad areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single panel replacement | Starting at $450 | Includes one matching panel, new fasteners and sealant; pitch and height move the price. |
| Flashing and penetration repair | Starting at $550 | Rebuilds step, counter or pipe boot flashing; masonry condition and access drive the cost. |
| Screw replacement and re-fastening | Starting at $650 | Pulls backed-out screws and resets panels on exposed-fastener roofs; roof size sets the total. |
| Storm damage multi-panel repair | On estimate | Needs an on-site look to count panels, check decking and confirm matching material. |
| Travel | Included | in Greensboro and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Diagnostic and minor leak repair | Starting at $450 | Covers inspection, confirmed leak source and a simple fix such as one fastener or boot. |
| Flashing or penetration repair | Starting at $650 | Rebuilds step, apron or counter flashing at a chimney, skylight or sidewall transition. |
| Panel or seam repair | Starting at $850 | Resecures separated seams or replaces a punctured panel section on standing seam roofs. |
| Multiple leak points | On estimate | Three or more separate entry points need an on-site look to scope labor and materials. |
| Emergency tarping | Starting at $350 | Secures the roof after limb falls or storm damage to stop active water entry. |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Washer swap and spot re-fastening | Starting at $750 | Covers pulling loose screws, replacing cracked washers, and resetting fasteners on one accessible roof slope. |
| Full-slope screw replacement | Starting at $1,150 | Includes oversized screws, new UV washers, hole inspection, and water test on a standard single slope. |
| Ridge, trim, and gable re-fastening | Starting at $850 | Re-secures ridge caps and trim that have worked loose from wind uplift on exposed gable ends. |
| Deck or purlin reinforcement | On estimate | Needed when fastener holes show soft wood or rot, and the substrate must be assessed on site first. |
| Travel | Included | in Greensboro and surrounding Piedmont Triad communities, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (336) 542-5382, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (basic) | Starting at $5.50/sq ft | Includes panels, screws, closures, and standard trim; price rises with roof pitch and tear-off. |
| R-panel (ribbed) roof | Starting at $6.25/sq ft | Stronger profile for garages and workshops; cost moves with panel gauge and color finish. |
| 5V crimp panel roof | Starting at $6.00/sq ft | Classic look for historic and farm buildings; access and height affect the final number. |
| Over-shingle retrofit | Starting at $4.75/sq ft | Panels over existing shingles where code allows; saves on tear-off and disposal fees. |
| Complex or large-scale job | On estimate | Multiple gables, dormers, or steep access need an on-site look before we quote. |
| Estimate | Free | Response within 24 hours at (336) 542-5382, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roofing installation | Starting at $9/sq ft | Includes panels, underlayment, standard flashing and labor; pitch and profile move the price |
| Slate or shake profile panels | Starting at $12/sq ft | Stamped slate and shake profiles cost more than standard architectural profiles due to panel layout |
| Metal roof over existing shingles | On estimate | Requires confirming existing layer count and deck condition before a number is given |
| Decking or rafter repair | On estimate | Soft sheathing and rafter repairs found during inspection are quoted separately before installation |
| Travel | Included | in Greensboro and surrounding Piedmont Triad areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and standard flashing; pitch and complexity raise the rate. |
| Over existing shingles | Starting at $7/sq ft | Panels installed over one sound shingle layer; code limits and deck condition affect eligibility. |
| Historic profile match | On estimate | Slate or shake profiles with custom color matching; design review and panel selection drive the number. |
| Repair and re-fastening | Starting at $450 | Replace lifted fasteners and reseal penetrations; leak location and panel count set the final price. |
| Travel | Included | In Greensboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent detail (bay, porch, dormer) | Starting at $20/sq ft | Includes shop-formed copper pan, soldered seams and tie-in; access and pitch move the price. |
| Zinc or aluminum accent | Starting at $18/sq ft | Includes formed cap or flashing and installation; roof height and detail count change the total. |
| Turret, cone or custom fabrication | On estimate | Needs on-site measurement and shop drawing before a number is given. |
| Full specialty metal roof | On estimate | Depends on square footage, seam type, deck condition and historic review requirements. |
| Travel | Included | In Greensboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic clean and coat | Starting at $2.50/sq ft | Includes pressure washing, algae removal, and one coat on a straightforward roof. |
| Rust treatment and two-coat system | Starting at $3.75/sq ft | Adds rust converter, primer, and second coat on rusted or chalked panels. |
| Coating with re-fastening | Starting at $4.50/sq ft | Combines coating with screw replacement and sealant renewal on exposed-fastener roofs. |
| Steep or complex roof access | On estimate | Steep pitch, cut-up rooflines, or tight side yards need an on-site look first. |
| Travel | Included | In Greensboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single skylight collar and curb repair | Starting at $600 | Includes opening the curb, replacing the collar flashing and water-testing the repair on a standard pitch. |
| Chimney step and counterflashing rebuild | Starting at $850 | Covers new bent step flashing woven into the courses and fresh counterflashing set at the roofline. |
| Valley or porch transition re-flash | Starting at $700 | Includes clearing debris, replacing worn valley metal and re-lapping panels at the transition. |
| Full penetration re-flash (chimney plus skylight) | On estimate | Multiple failed details on one roof need an on-site look to scope removal, decking and metal type. |
| Travel | Included | In Greensboro and surrounding areas, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (336) 542-5382, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards over one entry or walkway | Starting at $1,200 | Covers a typical single-family run with bar or pad guards, sealed fasteners and a water test included. |
| Full perimeter guard layout | Starting at $2,400 | Multiple roof planes, two or more guard rows and gutter hanger checks on a steep gable home. |
| Non-penetrating seam clamp system | Starting at $1,800 | Clamp-on guards for standing seam roofs, no panel penetration, finish warranty preserved. |
| Gutter and hanger reinforcement | Starting at $650 | Heavier hangers and brackets added where a past slide bent or pulled the existing gutters. |
| Complex or large-scale job | On estimate | Multi-gable, steep or two-story roofs need an on-site look before we quote a firm number. |
| Travel | Included | In Greensboro and surrounding Piedmont Triad areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, and fastener inspection with photo documentation and a written repair-versus-replace call |
| Minor repair (fasteners, seals, trim) | Starting at $350 | Replaces backed-out screws, re-sets seams, and re-seals laps on walkable roofs; height and access move the price |
| Panel and flashing replacement | Starting at $850 | Matching panel, new clips, and rebuilt flashing; steeper roofs and taller elevations add labor |
| Widespread storm damage | On estimate | Multiple slopes, wet deck, or insurance scope needs an on-site look before a number is given |
| Emergency tarping | Starting at $450 | Same-day water stop and temporary seal while the permanent repair is scheduled |
| Estimate | Free | Response within 24 hours at (336) 542-5382, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic condition inspection | Free estimate | Walk-over with photo summary and condition rating, price confirmed after we see the roof |
| Pre-purchase or insurance inspection | Starting at $250 | Full photo documentation and written report; roof size and number of penetrations move the price |
| Steep or rope-access inspection | Starting at $350 | Anchored access for steep gables and tall ridges; pitch and roof complexity drive the cost |
| Large or multi-building property | On estimate | We need an on-site look before quoting multiple roofs or outbuildings |
| Travel | Included | In Greensboro and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes on-site forming, hidden hangers, and standard downspouts; steep pitch or roof height raises the rate. |
| Half-round steel or aluminum | Starting at $14/linear ft | Includes exposed hangers and custom brackets for historic profiles; fascia condition and trim work move the price. |
| Oversized 6-inch with 3x4 downspouts | Starting at $13/linear ft | Includes high-capacity run and larger downspouts; roof area, pitch, and downspout count drive the final number. |
| Guarded system with debris screen | Starting at $16/linear ft | Includes micro-mesh or reverse-curve guard; heavy oak and pine load or long runs raise the rate. |
| Complex or large-scale job | On estimate | Multi-story access, historic district rules, or panel-specific brackets need an on-site look before we quote. |
| Estimate | Free | Response within 24 hours at (336) 542-5382, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn and shed roof repair | Free estimate | Includes roof inspection, leak diagnosis and written scope; price moves with panel count and access. |
| Exposed-fastener panel installation | Starting at $4.50 per sq ft | Includes panels, gasketed screws and basic flashing; pitch and insulation add to the total. |
| Standing seam commercial roof | Starting at $9.00 per sq ft | Includes concealed-fastener panels and standard trim; roof complexity and height drive the final figure. |
| Screw replacement and re-fastening | On estimate | Priced per panel run after we count backed-out screws and check for hidden rust at the laps. |
| Travel | Included | In Greensboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 542-5382, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Greensboro need a crew that understands what Piedmont weather does to a roof over decades, not a sales pitch. Greensboro Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofing across Greensboro, High Point, Burlington, Asheboro, Reidsville, and the surrounding communities. We work on steep gabled Craftsmans in Fisher Park, low-slope brick ranches in Starmount, and newer subdivision homes from Summerfield to Pleasant Garden.
This is a humid subtropical climate with fast summer thunderstorms, hail, hurricane remnants, occasional ice storms, and constant algae on shaded roofs. Add tall willow oaks, tulip poplars, and loblolly pines dropping limbs, plus a large stock of aging exposed-fastener roofs whose washers are drying out, and you get a region where metal roofing demands real local knowledge. Whether you need a Metal Roof Installation or a targeted repair, we give straight guidance on what your roof actually needs.
Most metal roof leaks in Greensboro trace back to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water slip past the screw head. Thermal movement, the daily expansion and contraction of metal in Piedmont sun, can separate seams and open gaps at panel laps. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the most vulnerable transitions. Wind-lifted panels after a storm and punctures from fallen willow oak or pine limbs round out the list.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so a stain on your ceiling may sit many feet from the actual breach. By the time it shows, you can have rotted sheathing, saturated insulation, and compromised structural wood. That is why we chase the source, not the stain. Our Metal Roof Leak Repair service finds and fixes the true failure point.
The honest repair-versus-replace call matters here. If panels and seams are sound and the problem is fasteners and flashing, a full screw replacement with new washers often restores a watertight roof for a fraction of replacement cost. If panels are perforated, seams are failing across the field, or the deck is soft, replacement is the right answer. Call (336) 542-5382 and we will tell you plainly which one you need. You can also request a free estimate.
We install the full range of metal systems and match the roof to the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, making it the premium choice for long-term durability. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic homes.
The honest comparison: standing seam costs more upfront but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound, and tear-off is the right call when it is not.
Metal roof projects are typically quoted per square foot for installs and often flat-rate for repairs. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges only, because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of what drives cost, see our pricing page, then request a free estimate or free roof inspection so we can give you a number based on your actual roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits: in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ by jurisdiction. Historic district or HOA design review can also affect panel profile and color choices.
We handle the paperwork and coordinate inspections as part of the job, but we never give legal or code advice. Requirements vary, so always verify with the Greensboro building or planning department before starting your project. To get started, contact us for a free estimate.
Ready to get started? Greensboro Metal Roofing serves in Greensboro and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Greensboro · Response within 24h · No commitment · ☎ (336) 542-5382
Your Free Quote Request